Electro mechanical clamping elements
Product descriptionno hydraulic, automatic clamping of dies on the ram, blank holders and machines at ambient temperatures up to 70C.
Electro-mechanical clamping elements for maximum operational reliability as a result of mechanical self-locking. Recommended for applications where a hydraulic system cannot be used. All elements are suitable for retrofit and for installation in original equipment. The result is shorter downtimes by minimizing the set-up times, thus more effective machine uptimes.
Angular clamps | Tenon-type clamping elements | Swivel and pull clamping elements | Swing clamps | Wedge clamps
clamping force: 70 to 160 kN operating retention force: 110 to 300 kN clamping stroke: 2 ... 15 mm clamping speed: 1.0 ... 4.1 mm/s motor voltage: 400 V / 50 Hz motor rating: 0.55 ... 1.1 kW
Mechanical clamping elements
Product descriptionfor clamping and locking dies on press beds and rams
High clamping forces, easy operation, compact design and low acquisition costs are to the fore here.
Sliding clamps | Clamping blocks | High-pressure spindles | Clamping nuts
clamping forces: from 15 to 200 kN T-slots: 14, 18, 22, 28, 36 and 42 mm max. tightening torque: 45 ... 140 Nm with and without clamping force monitoring
Magnetic clamping technology
Product descriptionMagnetic clamping systems
Magnetic clamping plates for different sectors of industry as e.g. for thermoplastics, elastomers, duroplastics, polyurethane, pressure die casting and metal forming. The magnetic clamping systems or clamping plates have been especially designed for injection moulding machines, rubber presses, die casting machines, mould carrier and presses for metal forming. All non-standard die moulds can be replaced quickly and easily without making any changes, because the standardization of dies.
The product range "M-TECS" stands for magnetic clamping technology, that means clamping technology of the highest level and offers the following key advantages for the user:
? standardisation of dies is not required ? height of clamping edge and die shape are not of importance ? low downtimes, lower setup costs ? increased productivity ? clamping in barely accessible positions without any problems ? no reduced clamping surfaces ? process monitoring and thus absolute safety ? clamping force on the complete surface and clamping with minimum deformation ? reduced maintenance costs
Hydraulic power units
Product descriptionHydraulic clamping power units or clamping pumps are especially designed for hydraulic clamping.
Hydraulic power units of compact design, ready for connection Suitable for the control of all of the listed clamping elements Individual solutions are possible by using the unique modular system On request also with turnkey on-site installation.
flow rate: 0.82 ... 12 l/min operating pressure: 160 ... 500 bar oil volume of the reservoir: 5 ... 63 l motor rating: 0.75 ... 3.0 kW motor voltage: 400 VAC 50 Hz
Accessories for die clamping technology
Product descriptionElements for oil supply to hydraulic elements
Fittings | High-pressure hoses | Couplings | Connecting blocks | Plug-in connectors | Hydraulic valves | Pressure gauges| Pressure switches | Hydraulic oil | Clamping pumps
Under this heading you will find useful accessories for easy installation of press clamping systems. In addition, individual spare parts for clamping power units.