Parts can be connected fast and easily with the ball lock connector in combination with the locating bushings.

The locating bushings are made from stainless steel. There are two versions available that can be mounted into wood (picture 2 and picture 4) and one version that can be mounted into plastic (picture 3). Both bushings (picture 2 and picture 3) allow an interlock of 4x90°. The bushing (picture 4) enables a 360° rotation in the locked state. 

As a robust tool, the item is made from stainless steel. The ball lock connector is maintenance-free, soundless and secured against loss.

Material

Pin part

• Stainless steel 1.4542

Ball

• stainless steel

Spring

• stainless steel

Assembly

Mounting into wood (picture 2 and picture 4)

• Insert location hole and pilot hole for safety bolt according to specifications
• Optionally recommended is the use of adhesive for securing
• Press in bushing
• Secure bushing with a screw

Note: The bore diameter (D2) for the pilot hole of the safety bolt depends on the screw used. 

Mounting into plastic (picture 3)

• Insert location hole according specifications
• Optionally recommended is the use of adhesive for securing
• Screw in bushing

Note: The bore diameter to be chosen for the location hole depends on the hardness of the plastic. 

Operation

The balls are unlocked by pressing the knob.

Notes

Special types on request.