I4111 Fixture Clamp with Fixed Jaw

Application
The fixture clamps are used for machining of dimensionally stable workpieces in single or multiple clamping fixtures.
Due to their compact design they can be arranged in a very limited space.
Fixture clamps are especially suitable for series manufacturing in automated mode.
The double-acting cylinder function combined with central lubrication and good swarf protection guarantees a high process safety.

Description
The fixture clamp with fixed jaw consists of a very small basic body with integrated hydraulic cylinder which actuates the movable jaw.
All threads and ports are at the bottom to allow a space-saving arrangement of several clamping points in a very limited space.
If fixing from below is not possible an adaptor plate for manifold mounting or tube connection is available. As accessory also blanks of clamping jaws are available for adaptation to the workpiece contour.
The fixed jaw can be equipped with a pneumatic seat control.

Important notes
The fixture clamp is only suitable for exterior clamping.
Lubricate at the latest after 500 clamping cylces the clamping slide via the central lubrication. Never use the complete clamping stroke to guarantee safe clamping of the workpiece.
Max. operating temperature 80 °C.