Prijava v B2B
rs
si en rs
Roemheld

Cilinder navojni B1470

double acting, max. operating pressure 500 bar

Koda: RO B1470
Izberi izvedbo | Prenesi dokument

Cilinder navojni B1470

Double-acting threaded-body cylinders are used when the return stroke must be effected in a certain time, e.g. with clock-pulse-controlled devices.
Of course they can also generate pulling forces.

These double-acting cylinders allow a space saving installation into the fixture body and therefore a hosefree oil supply. The double-wiper protects the piston and enables sealing with very little leakage. Sealing of the cylinders in the fit hole is made by two O-ring / support-ring combinations. Tightening of the cylinder can be made by a pin-type face spanner as per DIN  3116, so the collar can be immersed into the device, if necessary.

Za ogled cen se prijavite
Nazaj na seznam vseh
Številka izdelka File
Nobena verzija izdelka ne ustreza iskalnim kriterijem

B 1.470 Threaded-Body Cylinders

Double-acting threaded-body cylinders are used when the return stroke must be effected in a certain time, e.g. with clock-pulse-controlled devices.
Of course they can also generate pulling forces.

These double-acting cylinders allow a space saving installation into the fixture body and therefore a hosefree oil supply. The double-wiper protects the piston and enables sealing with very little leakage. Sealing of the cylinders in the fit hole is made by two O-ring / support-ring combinations. Tightening of the cylinder can be made by a pin-type face spanner as per DIN  3116, so the collar can be immersed into the device, if necessary.

Kataloški list B1470
Navodila za uporabo

Application example 1

Double-acting threaded-body cylinders in a multiple clamping bar for a welding fixture. Contact bolt with coupling pin (see data sheet G3.800)

Application example 2

Double-acting threaded-body cylinders as pull-type cylinders for a multiple clamping fixture to mill a wrench flat.

Application example 3

Injection mould

Cycle (portrayed in simplified terms):

1. Mould closed, substance injected
2. Threaded-body cylinder (5) moves out of the mould
3. Mould opens (the slide operates, the nozzle is free)
4. Workpiece will be removed from mould
5. Mould closes
6. Threaded-body cylinder (5) moves into the mould
1. New cycle

Send inquiry
Podobni produkti
Kvalitet

Mi smo sveobuhvatan dobavljač visokokvalitetnih proizvoda i usluga za industriju. Naše proizvode karakteriše visoka preciznost, fleksibilnost i visoka dostupnost na našim zalihama ili kod dobavljača.  

Raspoloživost

Naš asortiman se stalno širi i trenutno obuhvata više od 50.000 proizvoda. Većina proizvoda se može isporučiti sa zaliha ili u kratkim rokovima isporuke.

Podpora

Za sve proizvode nudimo veoma brzu i profesionalnu podršku na terenu, kao i digitalnu podršku za ceo prodajni program.