Prijava v B2B
rs
si en rs
Erwin Halder KG

Ekscentrična vpenjala

Koda: EH 23271-1
Izberi izvedbo

Ekscentrična vpenjala

The eccentric clamp allows clamping with pull-down effect on different workpiece forms at low height.

Material

  • Case-hardened steel, case-hardened and blue zinc-plated

Assembly

  • Manufacture a thread with the corresponding distance L2 / L3 to the workpiece.
  • Screw in the eccentric clamp at the necessary height and set it relative to the workpiece with its flat side.
  • Insert the workpiece and tighten the clamping pin using the internal hexagon. The proper tension is achieved after approx. 1/3 turn.

The threaded hole must be lubricated on a regular basis.

The rotational movement during tightening must always be completed towards the stops in order to prevent the workpiece from turning away from the stops.

Za ogled cen se prijavite
Nazaj na seznam vseh
Številka izdelka Clamping Force d1 d2 Conflict Minerals free Function
EH 23271.0003 0.05 kN M3 67 mm yes clamp
Loading Podatki se nalagajo...
EH 23271.0004 0.09 kN M4 8.7 mm yes clamp
Loading Podatki se nalagajo...
EH 23271.0005 0.1 kN M5 10.9 mm yes clamp
Loading Podatki se nalagajo...
EH 23271.0006 0.3 kN M6 13.5 mm yes clamp
Loading Podatki se nalagajo...
EH 23271.0008 2.7 kN M8 16.9 mm yes fasten
Loading Podatki se nalagajo...
EH 23271.0010 4 kN M10 20.9 mm yes clamp
Loading Podatki se nalagajo...
EH 23271.0012 5.4 kN M12 26.1 mm yes clamp
Loading Podatki se nalagajo...
Send inquiry
Podobni produkti
Kvalitet

Mi smo sveobuhvatan dobavljač visokokvalitetnih proizvoda i usluga za industriju. Naše proizvode karakteriše visoka preciznost, fleksibilnost i visoka dostupnost na našim zalihama ili kod dobavljača.  

Raspoloživost

Naš asortiman se stalno širi i trenutno obuhvata više od 50.000 proizvoda. Većina proizvoda se može isporučiti sa zaliha ili u kratkim rokovima isporuke.

Podpora

Za sve proizvode nudimo veoma brzu i profesionalnu podršku na terenu, kao i digitalnu podršku za ceo prodajni program.