Quality:
The KSN V self fastening disc provides users with the best RHODIUS tool in its category. RHODIUS TOPline products represent a maximum level of performance and quality.

Industries:
The RHODIUS self fastening disc was developed with the requirements of the automotive industry in mind. This product is the perfect tool for the many applications and challenges faced in car repair shops, vehicle construction, plant and tank construction, metalwork shops and in general installation work.

Machine suitability:
With its open mesh structure, the RHODIUS KSN V self fastening disc is suitable for use on a wide range of popular industry rotary sanders. Effective extraction units should be used, however, to ensure the best working results and a long tool lifetime.

Material suitability:
This product has been designed especially for processing GFRP, paint and filler, as well as stainless steel (SST, Inox), e.g. 1.4031 (X5CrNi18-10 or 304) and steel (carbon steel – also termed structural steel, St37, S235JR or 1.0037). Users can even achieve very good results on wood with the RHODIUS KSN V.

Structure and production:
The abrasive grain used here is high-quality, high-performance aluminium oxide. The high tear strength and open structure of the mesh also ensures that good dust extraction can be achieved. The end result is minimal clogging and a long lifetime as well as a working environment with low levels of dust pollution. Thanks to its open mesh structure, the RHODIUS KSN V self fastening disc can be used on a wide range of popular rotary sanders, regardless of the specific hole system used.

Applications:
The KSN V is an excellent choice for grinding of coatings and sanding off surface impurities.
This tool also makes short work of grinding off uneven areas on the edges of the surface to be repaired. This self fastening disc is also the tool of choice for smoothing off filler and primer coats or fine grinding work on primer filler.

Dimensions:
This self fastening disc is available in the diameters of 125 mm and 150 mm. To ensure an optimum working result and surface finish at all times, the user can select from grits ranging from 80 to 400.