Prijava v B2B
en
si en rs
Roemheld

Bore Clamp B1.481

double-acting, pull-type with and without centring function, clamping for bore diameter 16 to 46 mm, max. operating pressure from 50 up to 350 bar

Koda: RO B1481
Izberi izvedbo | Prenesi dokument

Bore Clamp B1.481

  • double-acting, pull-type
  • with and without centring function
  • clamping for bore diameter 16 to 46 mm
  • max. operating pressure from 50 up to 350 bar

The bore clamp is particularly suitable for centring and clamping of workpieces with smoothly machined bores with diameters from 16 to 46 mm and a support surface square to the hole axis.

The bore clamp is a combination of a double-acting pull-type cylinder equipped with a segment clamping bushing, which is pulled by a tie rod over a fixed cone. Thereby the segment clamping bushing expands radially to the bore diameter of the workpiece to be clamped. By the simultaneous axial movement the workpiece is clamped onto the hardened support at the housing. The obtainable low-clamping force depends on the factor of friction within the bore and the operating pressure.

Za ogled cen se prijavite
Back to all list
Številka izdelka File
Nobena verzija izdelka ne ustreza iskalnim kriterijem

B 1.481 Bore clamp 

The bore clamp is particularly suitable for centring and clamping of workpieces with smoothly machined bores with diameters from 16 to 46 mm and a support surface square to the hole axis.

The bore clamp is a combination of a double-acting pull-type cylinder equipped with a segment clamping bushing, which is pulled by a tie rod over a fixed cone. Thereby the segment clamping bushing expands radially to the bore diameter of the workpiece to be clamped. By the simultaneous axial movement the workpiece is clamped onto the hardened support at the housing. The obtainable low-clamping force depends on the factor of friction within the bore and the operating pressure.

Catalogue Sheet
Operating Instructions
Send inquiry
Podobni produkti
Kvaliteta

Smo celovit ponudnik visokokakovostnih izdelkov in storitev za industrijo. Naše izdelke odlikuje visoka natančnost, fleksibilnost in visoka razpoložljivost iz zaloge pri nas ali dobavitelju.

Razpoložljivost

Naš asortiman se nenehno širi in trenutno vključuje več kot 50.000 izdelkov. Večina izdelkov je dobavljiva iz zaloge oziroma v kratkih dobavnih rokih.

Podpora

Za vse izdelke nudimo visoko odzivno in profesionalno podporo na terenu, kot tudi digitalno podporo na celotnem prodajnem programu.